Editing Raspberry Pi Zero W / Pi 5 (section)

= HW Trouble =
[https://forums.raspberrypi.com/viewtopic.php?t=34700 OK01 LED blinks 3 times] - move the /boot/start.elf to a new name and rename it back / use a different SD card / reformat the SD card

[https://www.raspberrypi.com/documentation/computers/configuration.html#led-warning-flash-codes LED Warning Flash Codes list]

[https://www.raspberrypi.com/documentation/computers/configuration.html#firmware-warning-icons Firmware warnings]

[https://forums.raspberrypi.com/viewtopic.php?t=58151 Is Your Pi Not Booting Sticky Thread]

Steps:

- Use a 64GB SD Card (Sandisk)

- With nothing in: the screen showing it can't find a boot device works fine

- Waited for a day 

- Used Bookworm armhf (32bit) and arm64 (64bit) lite, bookworm full images

- bullseye arm64 image ends on screen saying it is not compatible with pi 5

- can't find any logs or journals in /mnt/var/log/ -R

- The only things connected to the Pi board are a micro HDMI adapter -> HDMI cable, the (official PI 5) Power adapter and the SD card - connect HDMI port 1

- The SD Card writer I have works fine for my Pi zero and Pi 2 (change SD card writer)