Cisco Catalyst 3550: Difference between revisions
Jump to navigation
Jump to search
New page: The switch is running IOS 12.1(11)EA1 [http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_11_ea1/configuration/guide/3550scg.html This is the operating manual... |
No edit summary |
||
(2 intermediate revisions by the same user not shown) | |||
Line 21: | Line 21: | ||
no service password-encryption | no service password-encryption | ||
! | ! | ||
hostname | hostname edgarswitch | ||
! | ! | ||
enable secret 5 | enable secret 5 somestring | ||
enable password | enable password somepass | ||
! | ! | ||
ip subnet-zero | ip subnet-zero | ||
! | ! | ||
cluster enable | cluster enable edgarnet 0 | ||
! | ! | ||
spanning-tree extend system-id | spanning-tree extend system-id | ||
Line 52: | Line 52: | ||
! | ! | ||
interface FastEthernet0/4 | interface FastEthernet0/4 | ||
description | description edgarSAFE | ||
switchport access vlan 2 | switchport access vlan 2 | ||
switchport mode access | switchport mode access | ||
Line 101: | Line 101: | ||
! | ! | ||
interface FastEthernet0/16 | interface FastEthernet0/16 | ||
description | description edgar_MONITOR_MGMT | ||
no ip address | no ip address | ||
! | ! | ||
Line 167: | Line 167: | ||
! | ! | ||
interface FastEthernet0/27 | interface FastEthernet0/27 | ||
description | description edgarSOAP | ||
switchport access vlan 98 | switchport access vlan 98 | ||
switchport mode access | switchport mode access | ||
Line 272: | Line 272: | ||
! | ! | ||
snmp-server engineID local 800000090300000B46CE3481 | snmp-server engineID local 800000090300000B46CE3481 | ||
snmp-server community | snmp-server community edgarro RO | ||
snmp-server community | snmp-server community edgarro@es0 RO | ||
snmp-server community | snmp-server community edgarrw RW | ||
snmp-server community | snmp-server community edgarrw@es0 RW | ||
! | ! | ||
line con 0 | line con 0 | ||
Line 307: | Line 307: | ||
3 operations active Fa0/18, Fa0/20 | 3 operations active Fa0/18, Fa0/20 | ||
4 internal active | 4 internal active | ||
96 | 96 edgar-INTERNET active | ||
97 | 97 edgar-OPS-01 active Fa0/17, Fa0/19, Fa0/21, Fa0/23 | ||
Fa0/25, Fa0/29 | Fa0/25, Fa0/29 | ||
98 | 98 edgar-DMZ-01 active Fa0/7, Fa0/27, Fa0/31 | ||
99 | 99 edgar-INT-01 active | ||
100 | 100 edgar-MAN-01 active Fa0/22, Fa0/24, Fa0/26, Fa0/28 | ||
Fa0/30, Fa0/32 | Fa0/30, Fa0/32 | ||
101 VLAN0101 active | 101 VLAN0101 active | ||
</pre> | |||
To change the password | |||
<pre> | |||
conf term | |||
en secret <insert pass> | |||
end | |||
copy running-config startup-config | |||
conf term | |||
en password <insert pass> | |||
end | |||
copy running-config startup-config | |||
why there are 2 passwords (secret and enable) is a mystery. | |||
To turn off the password: | |||
conf term | |||
no en secret / no en password | |||
end | |||
copy running-config startup-config | |||
</pre> | </pre> | ||
Latest revision as of 20:59, 18 January 2017
The switch is running IOS 12.1(11)EA1
Assigning IP adresses to ports
In order to connect using the portmaster the terminal emulator needs to be set at 9600 8-N-1
Common commands
show running-config
Current configuration : 5127 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname edgarswitch ! enable secret 5 somestring enable password somepass ! ip subnet-zero ! cluster enable edgarnet 0 ! spanning-tree extend system-id ! ! interface Loopback0 ip address 192.168.100.100 255.255.255.0 ! interface FastEthernet0/1 no switchport ip address 192.168.0.100 255.255.255.0 ! interface FastEthernet0/2 switchport access vlan 2 switchport mode access no ip address ! interface FastEthernet0/3 description ROUTER switchport access vlan 2 switchport mode access no ip address ! interface FastEthernet0/4 description edgarSAFE switchport access vlan 2 switchport mode access no ip address ! interface FastEthernet0/5 description INTERNET_MODEM switchport access vlan 2 switchport mode access no ip address ! interface FastEthernet0/6 description ROUTER_NEW switchport access vlan 2 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/7 description SDSL-router switchport access vlan 98 switchport mode access no ip address ! interface FastEthernet0/8 no ip address ! interface FastEthernet0/9 no ip address ! interface FastEthernet0/10 no ip address ! interface FastEthernet0/11 no ip address ! interface FastEthernet0/12 no ip address ! interface FastEthernet0/13 no ip address ! interface FastEthernet0/14 no ip address ! interface FastEthernet0/15 no ip address ! interface FastEthernet0/16 description edgar_MONITOR_MGMT no ip address ! interface FastEthernet0/17 description OPS_DB-01 switchport access vlan 97 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/18 switchport access vlan 3 switchport mode access no ip address ! interface FastEthernet0/19 description OPS_WWW-01 switchport access vlan 97 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/20 switchport access vlan 3 switchport mode access no ip address ! interface FastEthernet0/21 description OPS_WWW-02 switchport access vlan 97 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/22 description MAN_DB-02 switchport access vlan 100 no ip address ! interface FastEthernet0/23 description OPS_LB-01 switchport access vlan 97 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/24 description MAN_LB-01 switchport access vlan 100 no ip address ! interface FastEthernet0/25 description OPS_LB-02 switchport access vlan 97 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/26 description MAN_LB-02 switchport access vlan 100 no ip address ! interface FastEthernet0/27 description edgarSOAP switchport access vlan 98 switchport mode access no ip address ! interface FastEthernet0/28 description MAN_DB-01 switchport access vlan 100 no ip address ! interface FastEthernet0/29 description OPS_DB-02 switchport access vlan 97 switchport trunk encapsulation dot1q switchport mode trunk no ip address ! interface FastEthernet0/30 description MAN_WWW-01 switchport access vlan 100 no ip address ! interface FastEthernet0/31 description TEMP_MIGRATION_SRV-01 switchport access vlan 98 no ip address ! interface FastEthernet0/32 description MAN_WWW-02 switchport access vlan 100 no ip address ! interface FastEthernet0/33 no ip address ! interface FastEthernet0/34 no ip address ! interface FastEthernet0/35 no ip address ! interface FastEthernet0/36 no ip address ! interface FastEthernet0/37 no ip address ! interface FastEthernet0/38 no ip address ! interface FastEthernet0/39 no ip address ! interface FastEthernet0/40 no ip address ! interface FastEthernet0/41 no ip address ! interface FastEthernet0/42 no ip address ! interface FastEthernet0/43 no ip address ! interface FastEthernet0/44 no ip address ! interface FastEthernet0/45 no ip address ! interface FastEthernet0/46 no ip address ! interface FastEthernet0/47 no ip address ! interface FastEthernet0/48 no ip address ! interface GigabitEthernet0/1 no ip address ! interface GigabitEthernet0/2 no ip address ! interface Vlan1 no ip address shutdown ! interface Vlan97 ip address 192.168.97.20 255.255.255.0 ! interface Vlan98 no ip address ! ip classless ip http server ! ip access-list extended CMP-NAT-ACL dynamic Cluster-HSRP deny ip any any dynamic Cluster-NAT permit ip any any ! ! snmp-server engineID local 800000090300000B46CE3481 snmp-server community edgarro RO snmp-server community edgarro@es0 RO snmp-server community edgarrw RW snmp-server community edgarrw@es0 RW ! line con 0 line vty 0 4 password sruss3ll login line vty 5 15 password sruss3ll login ! ! monitor session 1 source vlan 1 - 1024 rx monitor session 1 destination interface Fa0/16 end
show vlan
VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/8, Fa0/9, Fa0/10, Fa0/11 Fa0/12, Fa0/13, Fa0/14, Fa0/15 Fa0/16, Fa0/33, Fa0/34, Fa0/35 Fa0/36, Fa0/37, Fa0/38, Fa0/39 Fa0/40, Fa0/41, Fa0/42, Fa0/43 Fa0/44, Fa0/45, Fa0/46, Fa0/47 Fa0/48, Gi0/1, Gi0/2 2 internet active Fa0/2, Fa0/3, Fa0/4, Fa0/5 Fa0/6 3 operations active Fa0/18, Fa0/20 4 internal active 96 edgar-INTERNET active 97 edgar-OPS-01 active Fa0/17, Fa0/19, Fa0/21, Fa0/23 Fa0/25, Fa0/29 98 edgar-DMZ-01 active Fa0/7, Fa0/27, Fa0/31 99 edgar-INT-01 active 100 edgar-MAN-01 active Fa0/22, Fa0/24, Fa0/26, Fa0/28 Fa0/30, Fa0/32 101 VLAN0101 active
To change the password
conf term en secret <insert pass> end copy running-config startup-config conf term en password <insert pass> end copy running-config startup-config why there are 2 passwords (secret and enable) is a mystery. To turn off the password: conf term no en secret / no en password end copy running-config startup-config
Configuring a range of interfaces
VLAN configuration - what are trunk ports etc
Cluster Management Suite (CMS)
One of the FastEthernet ports needs to have an IP address, a computer can then connect directly to that port and browse to the set IP (192.168.0.100) and log in using the 'Admin' user. The web browser needs to be IE, and the Java must be JRE 1.4.0 media:j2re-1_4_0-win.exe. The only way to get the browser to use this version of the Java web plugin is to uninstall all other versions of Java!