Domoticz: Difference between revisions
| Line 92: | Line 92: | ||
At systemctl restart monit;tail -f /var/log/monit.log | At systemctl restart monit;tail -f /var/log/monit.log | ||
you will see it has attached the webserver and where it is listening to. There are more security options, but I haven't used them here. It takes a while for the webserver to start up, but you can find it with ss -lp | grep 2812. | you will see it has attached the webserver and where it is listening to. There are more security options, but I haven't used them here. It takes a while for the webserver to start up (becausee of the start delay parameter!), but you can find it with ss -lp | grep 2812. | ||
Once it has started up you can visit it using http://domoticz.edgarbv.int:2812 | Once it has started up you can visit it using http://domoticz.edgarbv.int:2812 | ||
Revision as of 09:52, 12 April 2019
Install
When installing there are two choices
- hand compile
- use curl (for the "easy" way)
Curl
Domoticz from binary comes with a static openssl1.0.0 dependency, which Debian no longer offers. So first
cd /usr/local/src wget http://security.debian.org/debian-security/pool/updates/main/o/openssl/libssl1.0.0_1.0.1t-1+deb8u11_amd64.deb dpkg -i libssl1.0.0_1.0.1t-1+deb8u11_amd64.deb apt-mark auto libssl1.0.0 apt install libpython3.5 libpython3.5-dev curl -sSL install.domoticz.com | bash cd /opt/domoticz/ ./updatebeta
(NB I install to /opt/domoticz)
Check if everything is running ok
journalctl -full -u domoticz.service
In the web interface go to Setup -> Log and check more
if links don't work, look here and choose the one with your architecture. Unstable only works on ARM
by hand
There is some flag about not using staticssl
when visiting the SSL site, you may need to remove the port number the installer gives you and just go to https://ip
fixing the system crashes
Sometimes when you visit your site, it will tell you the daemon is offline. Using /etc/init.d/domoticz.sh status you won't see much about why it's stopped:
/etc/init.d/domoticz.sh status
● domoticz.service - LSB: Home Automation System
Loaded: loaded (/etc/init.d/domoticz.sh; generated; vendor preset: enabled)
Active: active (exited) since Wed 2019-04-10 11:36:53 CEST; 21h ago
Docs: man:systemd-sysv-generator(8)
Apr 10 11:36:53 domoticz systemd[1]: Stopped LSB: Home Automation System.
Apr 10 11:36:53 domoticz systemd[1]: Starting LSB: Home Automation System...
Apr 10 11:36:53 domoticz domoticz.sh[19243]: 2019-04-10 11:36:53.511 Status…Cuz
Apr 10 11:36:53 domoticz domoticz.sh[19243]: 2019-04-10 11:36:53.511 Status…:19
Apr 10 11:36:53 domoticz domoticz.sh[19243]: 2019-04-10 11:36:53.512 Status…cz/
Apr 10 11:36:53 domoticz domoticz.sh[19243]: domoticz: Domoticz is starting …...
Apr 10 11:36:53 domoticz domoticz[19251]: Domoticz is starting up....
Apr 10 11:36:53 domoticz systemd[1]: Started LSB: Home Automation System.
Apr 10 11:36:53 domoticz domoticz[19252]: Domoticz running...
Apr 11 09:11:18 domoticz domoticz[19252]: Domoticz stopped...
You can restart it using /etc/init.d/domoticz.sh restart and in /var/log/messages you will see something like the following:
Apr 11 09:11:18 domoticz domoticz: Domoticz stopped... Apr 11 09:29:07 domoticz domoticz: Domoticz is starting up.... Apr 11 09:29:07 domoticz domoticz: Domoticz running...
In order to monitor the process you use monit, as described Monitoring domoticz
apt install monit vi /etc/monit/monitrc
(note - get rid of any leading spaces!)
with start delay 240 set mailserver mail.edgarbv.com port 587 set alert robin@edgarbv.com
To check if mailing works, do
service monit restart; tail -f /var/log/monit.log
and it should send you a status notification by mail.
Once you have this running, it's time to start up the webserver. In /etc/monit/monitrc
set httpd port 2812 and allow admin:monit
At systemctl restart monit;tail -f /var/log/monit.log
you will see it has attached the webserver and where it is listening to. There are more security options, but I haven't used them here. It takes a while for the webserver to start up (becausee of the start delay parameter!), but you can find it with ss -lp | grep 2812.
Once it has started up you can visit it using http://domoticz.edgarbv.int:2812
To add monitoring for the domoticz service: vi /etc/monit/conf-available/domoticz-sw
check process domoticz-sw with pidfile /var/run/domoticz.pid
start program = "/etc/init.d/domoticz.sh start"
stop program = "/etc/init.d/domoticz.sh stop"
if failed
url http://127.0.0.1:8080/json.htm?type=command¶m=getversion
and content = '"status" : "OK"'
for 2 cycles
then restart
if 5 restarts within 5 cycles then exec "/sbin/reboot"
ln -s /etc/monit/conf-available/domoticz-sw /etc/monit/conf-enabled/
monit -t #to test
systemctl restart monit
view the website for more details
Evohome
Go to Setup -> Hardware. Next to Type, select Evohome via Web API
Under username / pass, fill in your mytotalconnectcomfort.com credentials. Make sure Synchronise, show schedule and location are all on. You may either lower or raise the poll intervall to anything you like but if you set it to less than ten seconds it will automatically reset itself to 60 seconds.
After pressing the 'Add' button to add the hardware device, the rest of the configuration will occur automatically and you should see your Evohome heating zones (and Hot Water device if you have one) appear in the devices list after about ten seconds. If you like you can now disable 'Synchronize installation'.
You then go to Setup -> Devices.
Click on the green import button on the right of each device.
Changing the short graph
The temperature graphs only have day, month and year. You can change the day to 7 days for a more week like list:
[SETUP] -->>[SETTINGS] -->> [LOG HISTORY] -->> [SHORT LOG SENSORS] -->> choose between 1 - 7 days
Dashboard
To get the graphs on the dashboard you have to use an extension, Dashticz