Pwnagotchi

Pwnagotchi.ai installation guide

Raspberry Pi GPIO pinout

Adafruit PiRTC DS3231 remove the GPIO connector and then solder

GPS + clock breakout looks pretty cool, should work

PiRTC pinout

2017 info on using DS3231 Real Time Clock

Use

  hwclock

For output

Waveshare e-ink display test utility

Networking

Via USB

change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)

add the following to the end of /boot/cmdline.txt

  g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B

In nm-connection-editor you can set the ipv4 settings on your linux box to 10.0.0.1/8 and then enable connection sharing and you can ssh in.

  ssh pi@10.0.0.2

You may or may not need these firewall rules

#!/bin/bash
sudo ip route add 10.0.0.0/8 dev enp0s20f0u1

~$ ip route list
default via 192.168.0.1 dev wlp4s0 proto dhcp metric 600 
10.0.0.0/8 dev enp0s20f0u1 proto kernel scope link src 10.0.0.1 metric 100 
169.254.0.0/16 dev wlp4s0 scope link metric 1000 
192.168.0.0/24 dev wlp4s0 proto kernel scope link src 192.168.0.55 metric 600

Wifi

you can't use iwconfig to connect the wireless, you have to use wpa_supplicant. raspi-config won't work because the pwnagotchi scripts put wifi in monitor mode. You need to change the wireless interface back to managed mode.

DNS

You will also have to add a DNS server to /etc/resolv.conf through /etc/dhcpcd.conf

  vi /etc/dhcpcd.conf  

Then, add this line:

  static domain_name_servers=1.1.1.1 8.8.8.8

There is a problem with dnsmasq clobbering resolvconf. There seem to be a few ways to solve this

/etc/dnsmasq.conf add

  server=1.1.1.1

possibly also set

  no-resolv

OR

add...

  DNSMASQ_EXCEPT=lo

to /etc/defaults/dnsmasq from here

OR

implement some of the resolvonf ingoring lines in /etc/dnsmasq.conf

OR go full nuke and

  systemctl disable dnsmasq

General Configuration

  raspi-config

Is your friend

There are 2 webinterfaces: https://piface.local:8080 which will show you the screen but with options to reboot and configure some stuff and https://piface.local:8081 which allows you to play with bettercap.

  /boot/config.txt
  /etc/pwnagotchi/config.toml
  /etc/pwnagotchi/default.toml (copy from here into config.toml)