HP Reverb G2 V2: Difference between revisions

From Edgar BV Wiki
Jump to navigation Jump to search
Line 245: Line 245:


[https://www.vr-rock.com/products/for-hp-reverb-g2-prescription-lens prescription lenses]
[https://www.vr-rock.com/products/for-hp-reverb-g2-prescription-lens prescription lenses]
[https://www.kat-vr.com/products/kat-walk-c2 Kat Walk C2] a treadmill that allows you to walk around in all directions

Revision as of 15:38, 12 April 2023

First time setup

You need to install Windows Mixed Reality from the Windows App Store. Also install OpenXR Tools for Mixed Reality.

In Steam install SteamVR. SteamVR allows you to play games, even if they were not bought in the Steam Store (eg in the Epic store). You will also need to install Windows Mixed Reality for Steam. https://learn.microsoft.com/en-us/windows/mixed-reality/enthusiast-guide/using-steamvr-with-windows-mixed-reality.

Use OpenXR

From your computer, open the SteamVR app

Head to Settings

Select Show in Advanced Settings

Head to the Developer tab

Set Current OpenXR runtime as "OpenXR runtime"

OpenXR ToolkitQuickstart, FS2020 settings, much more information


Sign up for betas

This is advised by Microsoft in their guide https://learn.microsoft.com/en-us/windows/mixed-reality/enthusiast-guide/using-steamvr-with-windows-mixed-reality


In Steam, use the drop-down under the Library menu to filter to Tools.

In the list, right-click SteamVR and select Properties.

Select the Betas tab.

Opt in to "beta - public beta" and select Close to confirm. The beta access code field should be left blank.


In Steam, use the drop-down under the Library menu to filter to Software.

In the list, right-click Windows Mixed Reality for SteamVR and select Properties.

Select the Betas tab.

Opt in to "beta - public beta" and select Close to confirm. The beta access code field should be left blank.

Controller shortcuts

Open Flashlight / Passthrough mode

windows (shortpress) then grip (thumb)

or

wmr platform which has a “flashlight” that you can activate by pressing the windows button and selecting “flashlight on” or you can just say “flashlight on” or “flashlight off” if the mic is enabled

You have to aim your controllers at the spot you want to look at.

If you set the controller down on a table (place it on the ring) it will expand the circle so you can see a larger area. Meant so you can access your physical keyboard, but works for anything

Also if you launch Flashlight from the start menu, it will place the circle at the center of your gaze, not the controllers

Turn on controllers

long press windows button

Batteries

Must be 1.5v otherwise you don't get haptic feedback.

Also preferably 3500 mWh / 2600 mWh. You can get USB chargeable ones but they only seem to go up to 2600 mWh

Environment

green dot indicators by clock in SteamVR menu

These indicate the battery level of each controller

Graphics settings

Motion Reprojection

With it entirely off there is a bit of stuttering, but detail clarity is very sharp. With it on motion is fluid

Disable overlays

- Epic: C:\Program Files (x86)\Epic Games\Launcher\Portal\Extras\Overlay and rename or move the two files:

EOSOverlayRenderer-Win64-Shipping.exe

EOSOverlayRenderer-Win32-Shipping.exe

- Steam: settings>In Game>Enable Steam Overlay while in-game UNCHECK

- XBOX: Disable the Xbox Game Bar overlay (yes on windows) Enter windows settings from the start menu, Select Gaming -> Xbox Game Bar -> Toggle the overlay to the off position

to try

supersampling off

use the USB adapter

don't use auto resolution

disable steam home in steamvr settings

external links

https://www.reddit.com/r/HPReverb/comments/k8m6nq/all_graphics_problems_fixed_hp_reverb_g2_no_more/

https://www.reddit.com/r/SteamVR/comments/bla8ze/what_does_advanced_super_sampling_filter_do_in/ Advanced Super Sampling Filter explanation

External Apps

https://store.steampowered.com/app/908520/fpsVR/ - fpsVR - shows you all the stuff you need to know to optimise fps (cpu / gpu temps etc)

https://www.reddit.com/r/WindowsMR/comments/m7q7p3/wmr_traytool_info_and_support_thread/ - WMR Traytool - So far it can start/stop your WMR headset device to bring it into a deeper sleep mode which consume less power, your headset stay cooler and the WMR Portal will never ever start by itself in that mode. You can start/stop, if you wish, SteamVR and the Oculus Service when you start/stop your WMR headset. You also can tweak some Registry settings, that are not changeable outside of the Registry editor. For example you can switch of the three virtual monitors that are created every time when you start WMR Portal. Also you can change the standby mode of your headset so it do not stop your VR apps anymore. And there is more (see pictures below).

https://github.com/matzman666/OpenVR-InputEmulator/ - OpenVR Input Emulator - change the controller offsets

https://github.com/LibreVR/Revive - Revive - Allows you to play (quite a lot of) Oculus exclusive games

https://store.steampowered.com/app/1173510/XSOverlay/ - XSOverlay - XSOverlay is a Desktop Overlay application for OpenVR. This means that you can access your desktop, or specific applications, and interact with them however you'd like to.

https://store.steampowered.com/app/457550/Bigscreen_Beta/ - Bigscreen Beta - a better media player

https://www.vr-toolbox.com/guide - VR Toolbox - create your own virtual room / home / space

Troubleshooting

https://reverb.danol.cz/troubleshooting/

not enough virtual memory can be a problem

https://forums.flightsimulator.com/t/crash-to-desktop-without-error-message/130085 - limit fps in nvidia control panel

going to sleep

https://forums.flightsimulator.com/t/crash-to-desktop-without-error-message/130085/3244 - The HP Reberb G2 goes to sleep after a while despite the change in the registry, and to have prevent the sleep in the device manager. I switch it to VR and it starts again. We are now at 4 hours of flight. And 0 CTD In Device Manager → Universal Serial Bus (USBs) controller go through each device and in the “Power Management Options” tab uncheck “Allow the computer to turn off this device”. SteamVR settigns Startup/Shudown

https://www.reddit.com/r/HPReverb/comments/xo5v2z/holographicshell_processwindows_11_performance/ - Run cmd/terminal and paste 'logman query HolographicShell -ets' to see if it's running. If it is, end it using 'logman stop HolographicShell -ets' and check

Can't see steamVR settings - click on icon in taskbar, right click on settings window, select 'move' use the keyboard arrows to move it to main display

crashes

https://www.drivereasy.com/knowledge/fix-elite-dangerous-crashing-on-pc/ Elite dangerous crashes

https://forums.frontier.co.uk/threads/elite-dangerous-odyssey-is-unstable-and-crashes-solved.592733/ Elite dangerous crashes in Odyssey

https://www.reddit.com/r/EliteDangerous/comments/kbsfbk/small_guide_to_vr_settings_for_elite_dangerous/ Elite dangerous settings guide

https://www.reddit.com/r/HPReverb/comments/l9ur9n/3080_hp_reverb_g2_steam_vr_crashes_on_all_games/ 080 + HP Reverb G2 = Steam VR Crashes on all games?

monitor resolution goes low when turned off

This results in all the icons being squished into a corner. What happens is that the main monitor may not have power off EDID messages, so when it is turned off, it disconnects the display from Windows, the second display (which may turn itself off but send and EDID message saying it's still on) takes over as primary monitor and all the windows and icons switch there. Windows 11 is smart enough to restore the application windows when the primary display turns on again, but not smart enough to restore the icon positions.

software solutions

In windows mixed reality settings (... below left) -> Virtual displays for apps -> turn off create virtual displays for classic apps

https://www.tenforums.com/graphic-cards/10681-tutorial-how-change-windows-10-default-resolution.html

1. Open "Regedit" and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\Configuration\SIMULATED_10DE_13 C2_00000001_00000000_1300^6C7185C1F893FF6C2863DDD8BF5E4ABF\00"

  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\Configuration

2. Change the "PrimSurfSize.cx" and "PrimSurfSize.cy" to your desired values of resolution. Note that it must be changed in "demicial" first

3. Then go to the second "00" and change "DwmClipBox.bottom" and "DwmClipBox.right", "PrimSurfSize.cx" and "PrimSurfSize.cy", "ActiveSize.cy" and "ActiveSize.cx" Find the monitors called SIMULATED or NOEDID and expand into the 00 / 01 and then below that again. Find the following entries and set them to your resolution ALSO find "Stride"

  3840 2160 STRIDE 15360

The following article also mentions

  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video\{99982D38-5DA5-11ED-B771-2C8DB1B61BD7}

This may be a way to cross reference the keys in the above configuration

Failing this Stardock Fences allows you to snapshot and restore your icon positions

You can also try https://sourceforge.net/projects/monitorswitcher/

I tried DesktopOK but it didn't work at all for my 4k monitor

This may also be related to the amount of virtual desktops that windows mixed reality creates

helpful applications

moninfo / Monitor Asset Manager gives you all the information passed through by EDID

Custom Resolution Utility / CRU CRU shows you how the monitor defines resolutions and other capabilities and gives you the power to change it. Add custom resolutions, remove unwanted resolutions, edit FreeSync ranges, and more. CRU creates software EDID overrides in the registry and does not modify the hardware.

Manufacturer override of monitor EDIDs Microsoft article explaining how to override the driver with an inf file or registry entry.

I haven't figured out how to get these apps to fix the problem though

related

What is DDC/CI and How to Use It

ClickMonitorDDC 7.2

hardware solutions

You can put a HDMI EDID pass through adapter / emulator on the end of your monitor. It will tell the GFX card that the monitor is still on, when it is in fact turned off.

a hdmi edid pass through adapter has to work for the given resolution as well as the refresh rate - and for > 60Hz at 4k (HDMI 2.0 specs) must be HDMI 2.1 compatible.

search on amazon

1080p hardware

Monitor Detect Killer was the first one I ever saw and works perfectly for Full HD.

Another way is to block pin 19 on the HDMI cable / port. Not sure if this is a very durable solution though. This has to do with hot plug detection

4k@60Hz hardware

Will work

EVanlak Hdmi Edid Emulator Passthrough 3rd Generrtion Premium Aluminum Eliminated Emulator Adapter Work with Mac Thunderbolt to HDMI Switches/Extender/AV Receiver/Video Splitters 1080- 3840x2160@60H $20,99

Monitor detect killer $19,99 (only full HD though)

8k / 4k@120Hz hardware

Will work DisplayPort 1.4 EDID Emulator $330

May work

2x2 HDMI Splitter : 2-in 2-out, UltraHD 8K, EDID (BK-22) $79

4K 120Hz HDMI 2.1 Audio Extractor 8K 60Hz VRR CEC HDCP2.3 HDR10 Audio Converter de-embed HDMI to HDMI SPDIF Optical 7.1/5.1CH, Stereo L/R Audio Breakout D-olby Digital Audio Decoder EDID $129

8K@60Hz 4K@120Hz HDMI 2.1 Splitter 1x2,48Gbps,Supports Soundbar,HDCP 2.2,HDCP 2.3 Bypass,Duplicate/Mirror,EDID,Copy,Downscale, HDR,Dolby Vision Atmos,8K HDMI Splitter 1 in 2 Out for Dual Monitors $144

HDFury Dr. HDMI 8K EDID Manager, 40 GB/s, HDMI 2.1, HDMI Handshake Problem Solution, Resolution up to 8K 60Hz (4:4) or 4K 120Hz (4:4:4), Black $249

HDMI 2.1 Switch 8K, AVIDGRAM Bi-Directional HDMI Switch 2 in 1 Out/1 in 2 Out Selector Hub with 8K @ 60Hz 4K @ 120hz 48Gbps for PS5 XSX UHD TV Monitor Projector (1 Display at a time) $33,99

CABLEDECONN HDMI 2.1 Ultra HD 8K High Speed 48Gbps Directional Switch Only 2 in 1 out 8K @ 60Hz 4K @ 120Hz Splitter Converter Compatible with Xbox PS5 Projectors Monitors $33,99

Related

HDMI 2.0 Max Refresh Rate & Resolution (Can You Get 144Hz?) short answer: HDMI 2.0 can offer high resolutions of up to 4K, a refresh rate of 60Hz & bandwidth of up to 18 Gbps. However, as you probably know, there are multiple versions of HDMI cables that vary in bandwidth capacity.

How to Make Your 120Hz or 144Hz Monitor Use Its Advertised Refresh Rate Some monitors may have both HDMI and DisplayPort connections, but may be limited to a 60Hz refresh rate when connected via HDMI. In this case, you’d need to use a DisplayPort cable. [...] You don’t just have to worry about the type of cable, either–you have to worry about the cable itself.


If you’re using DisplayPort, be sure you have a properly certified cable that’s built to the DisplayPort specification. A properly manufactured, certified cable built for DisplayPort 1.2 should work perfectly fine with DisplayPort 1.4. Unfortunately, there are a lot of poor quality cables out there, so a cable built and sold for DisplayPort 1.2 may not work with DisplayPort 1.4. There are also a few Reduced Bit Rate (RBR) DisplayPort cables on the market that will only support 1080p—just make sure you don’t have one of those. Visit the official DisplayPort website for more information.


If you’re using HDMI, you’ll want to ensure you’re using a “high speed” HDMI cable and not an older “standard” HDMI cable. However, you don’t need an HDMI cable with Ethernet included. Visit the official HDMI website for more information.

LG 55UH850V - Full Specifications (NB HDMI 2.0a, Resolution 3840 x 2160 px, Refresh rate 120.0 Hz, HDR Format Dolby Vision + HDR 10 + HDR Super)

External links

HP Reverb G2 - Improvements

HP facial interfaces / head gasket foam / silicone covers VRcover

counterweight hardware

prescription lenses

Kat Walk C2 a treadmill that allows you to walk around in all directions