T shirt printing: Difference between revisions
No edit summary |
|||
| Line 41: | Line 41: | ||
= The printer and ink = | = The printer and ink = | ||
Epson seems to be the way to go. It's important you use a pigment based ink, like the Epson | Epson seems to be the way to go. It's important you use a pigment based ink, like the [http://www.epson.co.uk/gb/en/viewcon/corporatesite/cms/index/29 Epson DURABrite Ultra] line, because it's waterproof. You do have to be careful, as it will clog your printerheads if you don't use the printer often enough. | ||
= The cutter = | = The cutter = | ||
Revision as of 11:52, 28 November 2012
Printing techniques
Pros and cons of each T-shirt printing method
Charles95405 has a few good things to contribute to this newbie discussion
Here is a forum diary of a newbie getting into the process
T-shirtforums.com is the standard place to start looking for information
The industry information bit on T-shirt Forums is where to find information on the process of printing, pressing, etc.
Heat Press/Inkjet/Laser printers
There are 2 types of paper for this:
You are limited to white / light coloured shirts with this process.
Vinyl
Unfortunately this is limited because you can only cut one colour at a time. So for multiple colours you have to cut multiple sheets of vinyl. Remember to cut the image backwards before pressing it!
It's not quite as good as Plastisol, but is high quality and has the advantage that you can use just a cutter to "print" the designs before pressing.
Plastisol
Plastisol transfers are high quality heat transfer prints. You do need a very expensive printer, so it's best to send your design to a plastisol printer and they will send you the sheets back.
UnionInk information about Plastisol. Also reverse print.
The software
Most people use CorelDraw as the GCC and Roland cutters have plugins for it which makes it very easy to send the cutting information
The printer and ink
Epson seems to be the way to go. It's important you use a pigment based ink, like the Epson DURABrite Ultra line, because it's waterproof. You do have to be careful, as it will clog your printerheads if you don't use the printer often enough.
The cutter
You need a cutter to cut away the stuff around the graphic or you will have a white background on the t-shirt.
The Roland GX-24 is the dog's bollocks of cutters, but very expensive ($2095,-).
The GCC 24-LX is fine to begin with and
The Roland Stika-15 is another good startup cutter.
These cutters can be used for heat transfer paper, plastisol and vinyl
The Heat Press
They come in several types and sizes.
5 tips: how to select which heat press to buy
How to choose the Right Heat Press to fit your needs
NB make sure it has a temperature + pressure gauge
Pressing is a bit of an art. You have to experiment with pre-heating, heating temperatures and pressure settings