Turn your phone into a car computer: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
In Automateit pro | In Automateit pro | ||
* remove all rules and then add these new ones (NB program this with the power cable in, other wise one of the rules will have the system shutting down) | * remove all rules and then add these new ones (NB program this with the power cable in, other wise one of the rules will have the system shutting down) | ||
# '''Trigger''': Battery level trigger below 15% '''Action''': (composite action) 1. show notification (low battery) 2. screen brightness lower 3. | # '''Trigger''': Battery level trigger below 15% '''Action''': (composite action) 1. show notification (low battery) 2. screen brightness lower 3. screen timeout 15 seconds [this will force a shutdown in a later rule] | ||
# '''Trigger''': Battery level below 20% '''Action''': Shutdown device '''Delayed Execution''': 15 minutes '''Rule name''': Battery low shutdown | # '''Trigger''': Battery level below 20% '''Action''': Shutdown device '''Delayed Execution''': 15 minutes '''Rule name''': Battery low shutdown | ||
# '''Trigger''': External Power Disconnected '''Action''': shutdown device '''Delayed execution''': 30 seconds '''Cancel Delayed Execution''': Power connected '''Rule Name''': Power disconnected shutdown | # '''Trigger''': External Power Disconnected '''Action''': shutdown device '''Delayed execution''': 30 seconds '''Cancel Delayed Execution''': Power connected '''Rule Name''': Power disconnected shutdown | ||
# '''Trigger''': Screen off '''Action''': Shutdown device '''Delayed execution''': 1 minute '''Cancel delayed execution''': (composite OR) 1. Screen on 2. Power Connected '''Rule Name''': Screen off shutdown ''[NB This is because the above rule may sometimes fail to run: if you turn off the car whilst the phone is still booting]'' | # '''Trigger''': Screen off '''Action''': Shutdown device '''Delayed execution''': 1 minute '''Cancel delayed execution''': (composite OR) 1. Screen on 2. Power Connected '''Rule Name''': Screen off shutdown ''[NB This is because the above rule may sometimes fail to run: if you turn off the car whilst the phone is still booting]'' | ||
# '''Trigger''': (composite AND) 1. | # '''Trigger''': (composite AND) 1. Boot 2. External power connected '''Action''': Start Application (navigation / Torque) '''Rule name''': torque start | ||
Next | |||
* Remove the lock screen (set to none) | |||
* set screen timeout to 5 minutes (under display - due to a few of the rules) | |||
Because Samsung can't do Fastboot the above method won't work for charger. See [[Automated power on with charging cable plugged]] for information for Samsung phones. | Because Samsung can't do Fastboot the above method won't work for charger. See [[Automated power on with charging cable plugged]] for information for Samsung phones. | ||
Revision as of 08:54, 10 December 2019
- root your phone
- install automateit pro
In Automateit pro
- remove all rules and then add these new ones (NB program this with the power cable in, other wise one of the rules will have the system shutting down)
- Trigger: Battery level trigger below 15% Action: (composite action) 1. show notification (low battery) 2. screen brightness lower 3. screen timeout 15 seconds [this will force a shutdown in a later rule]
- Trigger: Battery level below 20% Action: Shutdown device Delayed Execution: 15 minutes Rule name: Battery low shutdown
- Trigger: External Power Disconnected Action: shutdown device Delayed execution: 30 seconds Cancel Delayed Execution: Power connected Rule Name: Power disconnected shutdown
- Trigger: Screen off Action: Shutdown device Delayed execution: 1 minute Cancel delayed execution: (composite OR) 1. Screen on 2. Power Connected Rule Name: Screen off shutdown [NB This is because the above rule may sometimes fail to run: if you turn off the car whilst the phone is still booting]
- Trigger: (composite AND) 1. Boot 2. External power connected Action: Start Application (navigation / Torque) Rule name: torque start
Next
- Remove the lock screen (set to none)
- set screen timeout to 5 minutes (under display - due to a few of the rules)
Because Samsung can't do Fastboot the above method won't work for charger. See Automated power on with charging cable plugged for information for Samsung phones.