Pwnagotchi: Difference between revisions
Jump to navigation
Jump to search
Created page with "[https://pwnagotchi.ai/installation/ Pwnagotchi.ai installation guide] [https://pinout.xyz/# Raspberry Pi GPIO pinout] [https://www.adafruit.com/product/4282 Adafruit PiRTC..." |
No edit summary |
||
| Line 10: | Line 10: | ||
[https://github.com/waveshare/e-Paper/blob/master/RaspberryPi%26JetsonNano/python/readme_rpi_EN.txt Waveshare e-ink display test utility] | [https://github.com/waveshare/e-Paper/blob/master/RaspberryPi%26JetsonNano/python/readme_rpi_EN.txt Waveshare e-ink display test utility] | ||
change ethernet gadget (usb network) to a stable MAC address | |||
add the following to the end of /boot/cmdline.txt | |||
g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B | |||
Revision as of 12:16, 12 May 2020
Pwnagotchi.ai installation guide
Adafruit PiRTC DS3231 remove the GPIO connector and then solder
2017 info on using DS3231 Real Time Clock
Waveshare e-ink display test utility
change ethernet gadget (usb network) to a stable MAC address
add the following to the end of /boot/cmdline.txt
g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B