XBMC: Difference between revisions

From Edgar BV Wiki
Jump to navigation Jump to search
No edit summary
Line 2: Line 2:


[http://wiki.openelec.tv/index.php?title=Installing_OpenELEC_on_Raspberry_Pi installation instructions]
[http://wiki.openelec.tv/index.php?title=Installing_OpenELEC_on_Raspberry_Pi installation instructions]
= Optimising =
Turn off the RSS feed in System => Settings => Appearance.


= Bluetooth =
= Bluetooth =

Revision as of 08:50, 30 April 2014

OpenElec

installation instructions

Optimising

Turn off the RSS feed in System => Settings => Appearance.

Bluetooth

[1]

lsusb - shows you if the device is there

Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

bluetoothctl - opens a control panel to help play with your bluetooth device. Use help for commands.

list - lists the controller

show - shows the statusses

scan on - scans for devices

devices - shows you the devices it has found

you can also use hcitool - it has a few more options

hcitool scan

rebooting a LOT helps a lot on the pi!

LiveTV

The system needs to be running Tvheadend which takes the input from a DVB card and moves it to XBMC Live TV. It's configured through a web interface. In the Howto's there's a section on Ziggo that may apply to UPC as well.

DVB

DVB-C = cable DVB-S or S2 = satellite DVB-T or T2 = terrestrial

A list of linux (and therefore XBMC compatible) hardware is to be found on the LinuxTV wiki

Standard you need a DVB-C card with a CI interface. Some DVB-T boxen also have DVB-C compatibility and a CI card.

The HDHomeRun with TVHeadEnd is your best bet, but unfortunately this is not CI+ certified. So far, nothing is, as CI+ was developed to stop people from watching TV on their PCs.

You can find a list of raspberry pi verified peripherals at here