Shorewall
2 NIC machine
In /usr/share/doc/shorewall/examples/two-interfaces make the following edits to the following files and then copy them to /etc/shorewall
rules
SNMP(ACCEPT) loc $FW # Public services ACCEPT net fw tcp smtp ACCEPT net fw tcp pop3 # 143 is for IMAP ACCEPT net fw tcp 143 ACCEPT net fw tcp ssh FTP/ACCEPT net fw ACCEPT net fw tcp domain ACCEPT net fw udp domain ACCEPT net fw tcp http ACCEPT net fw tcp https ACCEPT net fw tcp snmp ACCEPT net fw udp snmp # X11 forwarding ACCEPT fw loc tcp x11 ACCEPT fw loc udp x11
just copy the following files to /etc/shorewall/:
interfaces masq policy routestopped zones
/etc/default/shorewall
startup=1
To get NFS working
On nfs-kernel-server machine: Edit your /etc/shorewall/rules file like this:
# Permit NFS ACCEPT net $FW tcp 111 ACCEPT net $FW udp 111 ACCEPT net $FW udp 2049 ACCEPT net $FW tcp 2049 ACCEPT net $FW tcp 32765:32767 ACCEPT net $FW udp 32765:32767
On nfs-common machine:
# Permit NFS ACCEPT $FW loc tcp 111 ACCEPT $FW loc udp 111 ACCEPT $FW loc udp 2049 ACCEPT $FW loc tcp 2049 ACCEPT $FW loc tcp 32765:32767 ACCEPT $FW loc udp 32765:32767
/etc/default/nfs-common:
STATDOPTS="-p 32765 -o 32766"
/etc/default/nfs-kernel-server:
RPCMOUNTDOPTS="-p 32767"
Make sure in your /etc/services you have the following
nfs 2049/tcp # Network File System nfs 2049/udp # Network File System
old system
The change to /etc/services isn't necessary at all. It just helps produces a nice (sensible) output from netstat -tl on the NFS server.
# /etc/services # NFS ports as per the NFS-HOWTO # http://www.tldp.org/HOWTO/NFS-HOWTO/security.html#FIREWALLS # Listing here does not mean they will bind to these ports. rpc.nfsd 2049/tcp # RPC nfsd rpc.nfsd 2049/udp # RPC nfsd rpc.statd-bc 32765/tcp # RPC statd broadcast rpc.statd-bc 32765/udp # RPC statd broadcast rpc.statd 32766/tcp # RPC statd listen rpc.statd 32766/udp # RPC statd listen rpc.mountd 32767/tcp # RPC mountd rpc.mountd 32767/udp # RPC mountd rcp.lockd 32768/tcp # RPC lockd/nlockmgr rcp.lockd 32768/udp # RPC lockd/nlockmgr rpc.quotad 32769/tcp # RPC quotad rpc.quotad 32769/udp # RPC quotad
/etc/default/quota
RPCRQUOTADOPTS="-p 32769"
You can check which ports are being used with
rpcinfo -p
Shorewall6
http://tldp.org/HOWTO/Linux+IPv6-HOWTO/ http://www.shorewall.net/IPv6Support.html
Shorewall6 is the ipv6 version of shorewall. To get it working you need to do above steps and also:
Make sure you have a valid IPv6 address connected to your NICs.
Because we have no valid ipv6 from KPN yet, we use a 6to4 tunnelling address, which always start with 2002:
In order to calculate the ipv6 from the ipv4 address we need:
ipv6calc --quiet --action conv6to4 188.204.140.215
or
ipv4="1.2.3.4"; printf "2002:%02x%02x:%02x%02x::1" `echo $ipv4 | tr "." " "`
This gives:
2002:bccc:8cd7::
so in /etc/network/interfaces add something like
auto tun6to4
iface tun6to4 inet6 v4tunnel
address 2002:bccc:8cd7::1
netmask 16
gateway ::188.204.140.193
endpoint any
local 188.204.140.215
underneath your ipv4 network interfaces. NOTE: Notice the '1' at the end! (see also 3.2.4.2 in http://tldp.org/HOWTO/Linux+IPv6-HOWTO/x513.html)
which we can test with:
ip -6 tunnel show tun6to4 ip -6 route show ping6 ipv6.google.com
in /etc/shorewall/shorewall.conf
DISABLE_IPV6=No TC_ENABLED=Internal
/etc/shorewall6/shorewall.conf
TC_ENABLED=No
test using
ip6tables -L
= Single NIC Machine
= /etc/default/shorewall Set startup=1 In /usr/share/doc/shorewall-common/default-config make the following edits to the following files and then copy them to /etc/shorewall interfaces net eth1 82.94.91.79 modules (no edits) policy fw net ACCEPT net all DROP info all all REJECT info NB to drop logging, get rid of the 'info' and replace it with 'crit' or 'err' or get rid of it entirely rules (under SECTION NEW) ACCEPT net fw tcp smtp ACCEPT net fw tcp pop3 ACCEPT net fw tcp ssh FTP/ACCEPT net fw ACCEPT net fw tcp domain ACCEPT net fw udp domain ACCEPT fw net udp domain ACCEPT net fw tcp http ACCEPT fw net tcp http ACCEPT net fw tcp https ACCEPT net fw tcp snmp ACCEPT fw net tcp snmp ACCEPT net fw udp snmp ACCEPT fw net udp snmp ACCEPT net fw tcp 143 ACCEPT net fw udp 143 start dmesg -n5 zones net ipv4 (above fw firewall)