Pwnagotchi

Pwnagotchi.ai installation guide

Raspberry Pi GPIO pinout

Adafruit PiRTC DS3231 remove the GPIO connector and then solder

PiRTC pinout

2017 info on using DS3231 Real Time Clock

Waveshare e-ink display test utility

Networking

Via USB

change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)

add the following to the end of /boot/cmdline.txt

  g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B

In nm-connection-editor you can set the ipv4 settings on your linux box to 10.0.0.1/8 and then enable connection sharing and you can ssh in.

  ssh pi@10.0.0.2

You may or may not need these firewall rules

#!/bin/bash
sudo ip route add 10.0.0.0/8 dev enp0s20f0u1

~$ ip route list
default via 192.168.0.1 dev wlp4s0 proto dhcp metric 600 
10.0.0.0/8 dev enp0s20f0u1 proto kernel scope link src 10.0.0.1 metric 100 
169.254.0.0/16 dev wlp4s0 scope link metric 1000 
192.168.0.0/24 dev wlp4s0 proto kernel scope link src 192.168.0.55 metric 600

You will also have to add a DNS server to /etc/resolv.conf

Wifi

you can't use iwconfig to connect the wireless, you have to use wpa_supplicant

ssh in

ssh pi@10.0.0.2