Cloning a PC to a new HD over the network

This method works if you want to clone a server to a new virtual machine

1. mount HD in VM (rightclick VM, edit settings, 'add' new device and create a new HD)
2. ensure rsync is on both machines
3. ensure ssh allows root logins on machine to back up
4. recreate the LVM structure on HD. Ensure there is a non-LVM partition for /boot where we can put the MBR on later
5. also make sure there is an LV or a HD partition for swap. Then

mkswap /dev/vg/swap

1. mount the LVs under /mnt/. First mount root, create the subdirs and then mount the rest
2. Sync the data:

 rsync -a -h --stats --exclude=/home/sites/www.cmtportal.nl/site/zuilen/upload/ --exclude=/home/store/ --exclude=/proc/ --exclude=/sys/ --exclude=/dev/ -e ssh root@192.168.0.9:/ /mnt/

(NB find HD UUID's using blkid)

1. edit the /mnt/etc/fstab to reflect the new LV names
2. vi /boot/grub/menu.lst or grub.cfg to reflect the new LV names

3. mkdir /var/, /sys/, /dev/

4. unmount the LV's
5. remove the HD from VM and add this to new VM
6. start up on rescue disk

vgscan
lvscan
vgchange -ay
mount -a
update-grub
grub-install /dev/sda
update-initramfs -u -k all
sync
exit

reboot (unmount the cd from the VM)

1. mount all drives
2. Install grub bootloader

update-grub
grub-install /dev/sda

1. swapon /dev/vgname/swap