Manufacturers

Kits

Fabbster Multicolour printing EUR 349

RepRap +- EUR 450

The machine is ready to use both the 3DP as the SLS process with minimal adaption, although the printer is currently prepped for 3DP

A whole new range of materials become available for experimenting with open-source rapid-prototyping; for example, when using the 3DP process: gypsum, ceramics, concrete, sugar, etc. And when the SLS process is fully supported, plastic materials like ABS, PP, Nylon and metals become available as building material.A Hewlett Packard inkjet cartridge is used for the deposition of binder. The cartridge can be refilled with custom binders using a syringe. A custom binder of 20% alcohol and 80% water has been proven to work.

Prebuilt

XYZ Printing Davinci 1.0 $499

Printrbot $599 +

FormLabs Form 1 $3299 -

Stereolithography (SL) technology approaches the highest resolution available in 3D printing, blowing away plastic extrusion (FDM) performance. Stereolithography (SL) is the gold standard for 3D print resolution and surface finish. In this photopolymer-based process, a high precision system directs a laser across a tray of liquid resin and causes a thin layer to solidify. The build platform then rises in preparation for the next layer. After thousands of repetitions, your part is complete with exquisite detail.

Fabbster Multicolour printing EUR 1699