3D Printing: Difference between revisions

From Edgar BV Wiki
Jump to navigation Jump to search
No edit summary
 
(14 intermediate revisions by the same user not shown)
Line 7: Line 7:


[http://reprap.org/wiki/PartsSupplies RepRap] +- EUR 450
[http://reprap.org/wiki/PartsSupplies RepRap] +- EUR 450
[http://www.mendelmax.com/ MendelMax] $770


[http://pwdr.github.io/ pwdr.] $1000
[http://pwdr.github.io/ pwdr.] $1000
Line 14: Line 16:
A whole new range of materials become available for experimenting with open-source rapid-prototyping; for example, when using the 3DP process: gypsum, ceramics, concrete, sugar, etc. And when the SLS process is fully supported, plastic materials like ABS, PP, Nylon and metals become available as building material.A Hewlett Packard inkjet cartridge is used for the deposition of binder. The cartridge can be refilled with custom binders using a syringe. A custom binder of 20% alcohol and 80% water has been proven to work.
A whole new range of materials become available for experimenting with open-source rapid-prototyping; for example, when using the 3DP process: gypsum, ceramics, concrete, sugar, etc. And when the SLS process is fully supported, plastic materials like ABS, PP, Nylon and metals become available as building material.A Hewlett Packard inkjet cartridge is used for the deposition of binder. The cartridge can be refilled with custom binders using a syringe. A custom binder of 20% alcohol and 80% water has been proven to work.
</pre>
</pre>
[https://www.kickstarter.com/projects/mosaic3d/the-palette-3d-printing-evolved the palette] allows you to turn a single filament printer into a multicolour, multimaterial printer


== Prebuilt ==
== Prebuilt ==
[http://3dprinter.dremel.com/ Dremel] $999,- and 10 colours
[http://www.xyzprinting.com/en/product XYZ Printing Davinci 1.0] $499
[http://www.xyzprinting.com/en/product XYZ Printing Davinci 1.0] $499


Line 24: Line 30:
Stereolithography (SL) technology approaches the highest resolution available in 3D printing, blowing away plastic extrusion (FDM) performance. Stereolithography (SL) is the gold standard for 3D print resolution and surface finish. In this photopolymer-based process, a high precision system directs a laser across a tray of liquid resin and causes a thin layer to solidify. The build platform then rises in preparation for the next layer. After thousands of repetitions, your part is complete with exquisite detail.
Stereolithography (SL) technology approaches the highest resolution available in 3D printing, blowing away plastic extrusion (FDM) performance. Stereolithography (SL) is the gold standard for 3D print resolution and surface finish. In this photopolymer-based process, a high precision system directs a laser across a tray of liquid resin and causes a thin layer to solidify. The build platform then rises in preparation for the next layer. After thousands of repetitions, your part is complete with exquisite detail.
</pre>
</pre>
[https://www.lulzbot.com/catalog Lulzbot] $1995


[http://www.fabbster.com/ Fabbster] Multicolour printing EUR 1699
[http://www.fabbster.com/ Fabbster] Multicolour printing EUR 1699
[https://botobjects.com/prices Botobjects] 3d colour with 5 spools for €3499.00


== Serious Shit ==
== Serious Shit ==
Line 37: Line 47:


[http://www.organovo.com/ Organovo] Human Tissue printing / Bioprinting
[http://www.organovo.com/ Organovo] Human Tissue printing / Bioprinting
[http://www.contourcrafting.org/ Contour Crafting] Construction sites (US)
[http://www.computerworld.com/s/article/9249532/3D_printer_constructs_10_buildings_in_one_day_from_recycled_materials Yingchuang New Materials Inc] Buildings (Chinese)
[http://news.unist.ac.kr/realizing-futuristic-3d-printing-technology/ Thinner than red blood cell]


== Materials for printing with ==
== Materials for printing with ==
Line 44: Line 60:


== Free for home ==
== Free for home ==
[http://www.sketchup.com/ Sketchup]
[http://www.sketchup.com/ Sketchup] Too simple when it gets complex


[https://tinkercad.com/ TinkerCAD] Webbased
[https://tinkercad.com/ TinkerCAD] Webbased


[http://www.123dapp.com/design Autodesk 123 Design]
[http://www.123dapp.com/design Autodesk 123 Design] Webbased


== Free for all ==
== Free for all ==
[http://brlcad.org/ BRLCAD]
[http://brlcad.org/ BRLCAD]


[http://www.openscad.org/ OpenSCAD]
[http://www.freecadweb.org/ FreeCAD]
 
[http://www.openscad.org/ OpenSCAD] Code your model


[http://www.blender.org/ Blender]
[http://www.blender.org/ Blender]
== Paid ==
[https://www.solidworks.com/ Solidworks]


== Interior Design ==
== Interior Design ==
Line 70: Line 91:


[http://www.makerscanner.com/ Makerscanner]
[http://www.makerscanner.com/ Makerscanner]
[http://seene.co/ Seene] Turns an iphone into a 3d scanner
= Services =
[http://www.shapeways.com/ Shapeways]
[http://staples.myeasy3d.com/ Staples MyEasy3D]

Latest revision as of 06:01, 24 June 2015

Manufacturers

Kits

3D Stuffmaker $395 +

Fabbster Multicolour printing EUR 349

RepRap +- EUR 450

MendelMax $770

pwdr. $1000

The machine is ready to use both the 3DP as the SLS process with minimal adaption, although the printer is currently prepped for 3DP

A whole new range of materials become available for experimenting with open-source rapid-prototyping; for example, when using the 3DP process: gypsum, ceramics, concrete, sugar, etc. And when the SLS process is fully supported, plastic materials like ABS, PP, Nylon and metals become available as building material.A Hewlett Packard inkjet cartridge is used for the deposition of binder. The cartridge can be refilled with custom binders using a syringe. A custom binder of 20% alcohol and 80% water has been proven to work.

the palette allows you to turn a single filament printer into a multicolour, multimaterial printer

Prebuilt

Dremel $999,- and 10 colours

XYZ Printing Davinci 1.0 $499

Printrbot $599 +

FormLabs Form 1 $3299 -

Stereolithography (SL) technology approaches the highest resolution available in 3D printing, blowing away plastic extrusion (FDM) performance. Stereolithography (SL) is the gold standard for 3D print resolution and surface finish. In this photopolymer-based process, a high precision system directs a laser across a tray of liquid resin and causes a thin layer to solidify. The build platform then rises in preparation for the next layer. After thousands of repetitions, your part is complete with exquisite detail.

Lulzbot $1995

Fabbster Multicolour printing EUR 1699

Botobjects 3d colour with 5 spools for €3499.00

Serious Shit

MCOR The ones Staples use

3d Systems ProJet 4500

Stratsys Objet Connex

MarkForged Carbon Fibre

Organovo Human Tissue printing / Bioprinting

Contour Crafting Construction sites (US)

Yingchuang New Materials Inc Buildings (Chinese)

Thinner than red blood cell

Materials for printing with

Emerging objects Cement, Wood, Chocolate, Paper, Salt, Nylon, Acrylic...

Software

Free for home

Sketchup Too simple when it gets complex

TinkerCAD Webbased

Autodesk 123 Design Webbased

Free for all

BRLCAD

FreeCAD

OpenSCAD Code your model

Blender

Solidworks

Interior Design

Intericad

Digitisers / Scanning

Makerbot Digitizer $949

Autodesk 123D Catch

Visual SFM

SparkoCam Turns a Nikon / Canon into a webcam. Also allows you to add effects realtime.

Makerscanner

Seene Turns an iphone into a 3d scanner

Services

Shapeways

Staples MyEasy3D