Debian Network Setup: Difference between revisions

From Edgar BV Wiki
Jump to navigation Jump to search
(Created page with "pdnsd - use resolvconf configuration Set up networking in /etc/network/interfaces <pre> # The loopback network interface auto lo iface lo inet loopback # The primary network...")
 
No edit summary
Line 40: Line 40:


[https://www.debian.org/doc/manuals/debian-reference/ch05.en.html Debian reference manual Chapter 5. Network setup]
[https://www.debian.org/doc/manuals/debian-reference/ch05.en.html Debian reference manual Chapter 5. Network setup]
For more advanced iproute2 information see
[[Multiple IP addresses on one NIC and Multiple internet connections on one nic]]
Of which the following is very useful:
http://www.policyrouting.org/iproute2.doc.html#ss9.16
ip link list - shows the physical devices
ip addr list - shows the adressees the links have
ip addr show dev eth0
Basic ip route - http://linux-ip.net/html/tools-ip-route.html
ip route list - like netstat -rn
/etc/iproute2/rt_tables - contains the routing tables
ip route show table local / main - shows the specified table
ip -s route show cache
ip route flush cache
NB - ip route flush kills all the routing tables!!!
More on routing tables - http://linux-ip.net/html/routing-tables.html
{| class="wikitable"
|-
! legacy net-tools commands !! iproute2 replacement commands
|-
| arp || ip n (ip neighbor)
|-
| ifconfig || ip a (ip addr), ip link, ip -s (ip -stats)
|-
| iptunnel || ip tunnel
|-
| nameif || ip link
|-
| netstat || ss, ip route (for netstat -r), ip -s link (for netstat -i), ip maddr (for netstat -g)
|-
| route || ip r (ip route)
|}
eth0 82.94.91.77
eth0:0 188.204.140.196/27

Revision as of 07:00, 1 April 2019

pdnsd - use resolvconf configuration

Set up networking in /etc/network/interfaces

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#auto eth0
iface eth0 inet static
        address 192.168.0.112
        netmask 255.255.255.0
        network 192.168.0.0
        broadcast 192.168.0.255
#       gateway 192.168.0.1
        dns-nameservers 213.75.63.36 213.75.63.70 192.168.0.1
#       dns-nameservers 192.168.0.1 192.168.0.2
#       dns-search mynet.int internal.mynet.int ops.mynet.int

auto eth1
iface eth1 inet static
        address 188.204.140.195
        netmask 255.255.255.224
        network 188.204.140.192
        broadcast 188.204.140.223
        gateway 188.204.140.193
        dns-nameservers 213.75.63.36 213.75.63.70 192.168.0.1

NB for dns-search or dns-domain lines to work in the above stanzas you need to have the resolvconf package installed. Otherwise you will have to add the following to /etc/resolve.conf

search mynet.int
search internal.mynet.int
...

Debian NetworkConfiguration wiki page

Debian reference manual Chapter 5. Network setup

For more advanced iproute2 information see

Multiple IP addresses on one NIC and Multiple internet connections on one nic

Of which the following is very useful: http://www.policyrouting.org/iproute2.doc.html#ss9.16

ip link list - shows the physical devices

ip addr list - shows the adressees the links have

ip addr show dev eth0

Basic ip route - http://linux-ip.net/html/tools-ip-route.html

ip route list - like netstat -rn

/etc/iproute2/rt_tables - contains the routing tables

ip route show table local / main - shows the specified table

ip -s route show cache

ip route flush cache

NB - ip route flush kills all the routing tables!!!

More on routing tables - http://linux-ip.net/html/routing-tables.html

legacy net-tools commands iproute2 replacement commands
arp ip n (ip neighbor)
ifconfig ip a (ip addr), ip link, ip -s (ip -stats)
iptunnel ip tunnel
nameif ip link
netstat ss, ip route (for netstat -r), ip -s link (for netstat -i), ip maddr (for netstat -g)
route ip r (ip route)

eth0 82.94.91.77

eth0:0 188.204.140.196/27