Honeywell Evohome heating

From Edgar BV Wiki
Jump to navigation Jump to search

hardware

For heating you need a smart radiator valve / TRV (thermostatic radiator valve) / Central heating valve

Conrad has these which are programmable but not smartthings

Honeywell Evohome will be compatible with smartthings soon (they have been saying for years)

Tado

Danfoss doesn't seem to work

MiHome has a hack

So far it looks like you will have to connect the brand thermostat to the TRV

Your smart heating package constists of the following:

- TRVs for the radiators

- a thermostat

- a controller / receiver for the CV installation.


The controller / receiver comes in 2 types:

- opentherm: an open standard that allows graduated control over the heat the CV generates http://centrale-verwarming-combiketels.welke-kiezen-kopen.nl/opentherm-wat-is-het-voordeel-cv-ketels.php

- on / off

When you install your system, you also need a bypass to allow for water to circulate. A possibility is to have one of your radiators on all the time, to act like a bypass.

Honeywell has a 4 zone wifi kit for EUR 483 https://www.cvkoopjes.nl/honeywell-zoneregeling/honeywell-evohome-wi-fi-4-zone-aanuit-pakket.html?gclid=CLPV8bz8nswCFegp0wodKVgGSA#/75-garantie-2_jaar_standaard/ and for EUR 505 http://www.paradigit.nl/honeywell-evohome-multi-zone-radiatorpakket-on-off/80039504/details.aspx?channel_code=210&s2m_product_id=80039504&utm_source=adcore-v4&gclid=CMbUnKz7nswCFeQp0wodjBIC6Q

You can buy the receiver seperately for around EUR 100,-

https://www.google.nl/search?q=Honeywell+opentherm+ontvanger&ie=utf-8&oe=utf-8&gws_rd=cr&ei=hnkYV7HnIcSRgAbtnIOgAg#q=Honeywell+opentherm+ontvanger&safe=off&tbm=shop

There's also a remote sensing TRV head, for if your radiator is enclosed

http://www.honeywelluk.com/products/Valves/Thermostatic-Radiator-Valve/TRV-Accessories-Head/Remote-Sensing-TRV-Head/

https://www.kijkvoelbeleef.nl/Honeywell/Producten/Product/Distance-Plus/ (in NL they are called Distance Plus)

for around EUR 25 https://www.installatievakwinkel.nl/honeywell-radiatorthermostaatknop-recht-economy-distance-wit-t900120w0?utm_source=beslistslimmershoppen&channable=e5791.MzA1MjAwMzY5Mjc&utm_content=Honeywell&utm_campaign=beslist&utm_medium=cpc&utm_term=30520036927

or EUR 59 https://www.installatievakwinkel.nl/honeywell-radiatorthermostaatknop-recht-distance-plus-wit-t950120w0

but I don't know if they are compatible with EvoHome.

Unfortunately the Nefit Ecomline HR line of CVs is on/off only and doesn't have an opentherm adapter. There is an adapter for their own smart thermostat, but you can't use that to connec to the Honeywell Evohome.

evohome controller

The Evohome controller has a maximum of 12 zones. Floor heating needs it's own zone and cannot be combined with a TRV.

system configuration

To get into the installation menu, you need to long press the settings icon. This allows you to configure zones, system devices, system parameters, add zone, system summary, fr comms check and factory reset.

Try to not use spaces in zone names (for graphing)

adding multiple TRVs to a zone

Keep the TRVs physically close to the controller.

After creating the zone, add the first TRV (press button once to see "unbound", long press button until you see "bind", press button until you see "success"). Wait for sync to finish and press the button on the TRV. You should now see the zone name.

It will then ask you to add more sensors. Put them all into binding mode (see above) and THEN press the bind button on the controller. It will add them all silmutaneously. WAIT for syncing to stop and check each TRV to see if they have been added to the zone (press button once) before pressing OK / green tick on the controller.

default temperature sensor when using multiple TRVs in a zone

if it is a zone using multiple HR92, the FIRST one that you bind is sensor and actuator, subsequent HR92s bound are only bound as actuators

however

if you then go into system parameters, zone parameters

you can change from a single to multiroom zone

this enables every HR92 to be sensor and actuator

rezoning a TRV

See below.

evohome HR92 TRV

rezoning a TRV

To rezone a TRV you need to unbind ALL TRVs from the old AND new zone, destroy the zone on the controller and then rebind. Otherwise things can Go Wrong. Note that the first TRV to connect to a new zone is the one which will measure the temperature, if there are multiple TRVs per zone.

unbind a TRV from a zone

To unbind a bound TRV, first click the button once. It will show the room it is bound to. Now press and hold the button until the display says "bind". (you can also do a RF check from this menu). With "bind" in the display, press and the button. It will say "binding". Press and hold the button. The display will show "cleared". At this point release the button. If you press the button once, it will show "unbound".

Note - if you change the settings on the TRV and under 12 restore to factory settings, this will NOT destroy the binding - it is retained.

bind the TRV

How to bind the HR92 to Evohome controller? First get the evohome controller

Basically press the button once, it will say "unbound". Then press the button for five seconds. The display will say "bind". You should receive a SUCCESS message on the evohome controller(if not go back and re-bind). The name of the allocated zone should appear on the HR92 display when you press the User-added image button.

changing TRV settings

How to change the parameters on the HR92 Wireless Radiator Controller?

To change language, backlight, duration of window function, sensitivity of window function, valve stroke, temperature representation in display, temperature offset, battery type, display of the valve position, window open function and reset to factory settings (NB does not unbind from the zone!) keep the button pressed for five seconds (NB NOT when showing a zone name!). Keep the image button pressed for approximately 5 seconds until Parameter 1 flashes (left-hand digit). The right hand digit shows the current setting. The parameter is displayed additionally in plain text ; for example, the display 1 1 stands for Parameter 1 (language) with Setting 1 (English). Use the adjustment dial to select the desired parameter (left-hand digit). Press the button to edit the parameter. The current setting of the parameter flashes (right-hand digit). Use the adjustment dial to set the desired setting (right-hand digit) and confirm with button. For the further parameters repeat. To exit the menu, select "EXIT" using the adjustment dial and confirm with the button.

Hr92 settings 1234.png

Hr92 settings 5678.png

Hr92 settings 9101112.png

Connecting the TRV using an adapter / if the heating stays hot

This happens because the fitting is not compatible. You will need a radiator adapter

Honeywell-evohome-radiatorthermostaat-afsluiter-vergelijken-m30-danfoss-comap-herz-ta-vaillant.jpg

Verwarmenperkamer

wifithermostaten

Todocontrol has another adapter R453HY012 which you can screw into the TRV as an alternative

graphing / logging evohome over time

Most graphing modules need you to have the evoconnect connected to your heating. Setup guide - Honeywell Total Connect Comfort + Cacti

Home Assistant has a binding with rrd type history graphs

Evohome-munin uses the web api and is pretty accurate Find munin here

My guide to grafana / influxdb

here is a guide to using python and plot.ly

Domoticz has a nice and easy graphing for Evohome

SmartThings Data Visualisation using InfluxDB and Grafana thread with some really nice dashboard examples in the comments

Andrew Blake Evohome Utils Github

  • Perform logging of your EvoHome thermostat actual and target temperatures
  • Log to either CSV or InfluxDB (or both)
  • Backup and restore weekly setpoint schedules
  • Log to Influx to then visualise easily in Grafana

jankeesvw Evohome to InfluxDB This is a docker container that pushes data from the Honeywell Evohome API to InfluxDB.

Freeranger To allow you to read your actual and desired temperatures from your EvoHome system (and others) and log them to a variety of destinations. Destinations include "data stores" such as .csv files or influxdb database for further ingestion by Excel or grafana respectively, or directly to graphing websites such as Plot.ly and emoncms

Grafana Builds dashboards. open source software for time series analytics, No matter where your data is, or what kind of database it lives in, you can bring it together with Grafana. Beautifully.

Prometheus seems to be fairly popular, but I haven't seen many screenshots yet

Note - Influxdb or graphite are better databases for logging this kind of data as they are time series dbms

about time series dbms

A Time Series DBMS is a database management system that is optimized for handling time series data: each entry is associated with a timestamp.

For example, time series data may be produced by sensors, smart meters or RFIDs in the so-called Internet of Things, or may depict the stock tickers of a high frequency stock trading system.

Time Series DBMS are designed to efficiently collect, store and query various time series with high transaction volumes. Although time series data can be managed with other categories of DBMS (from key-value stores to relational systems), the specific challenges often require specialized systems.
E.g. a query like 'SELECT SENSOR1_CPU_FREQUENCY / SENSOR2_HEAT' joins two time series based on the overlapping areas of time for each and outputs a single composite time series.

Unfortunately the Cacti template can't be downloaded any more :(

The API rate limit to allow you to poll device status every 5 minutes for up to 20 devices per hour, with a little cushion to make changes. If you need a higher rate limit, please contact us: HoneywellAPISupport@honeywell.com

Support pages

Evohome Support

Honeywell trade page with all products

Honeywell developer guides