My guide to grafana / influxdb

From Edgar BV Wiki
Jump to navigation Jump to search

adapted from SmartThings Data Visualisation using InfluxDB and Grafana

Influxdb

apt-get install influxdb influxdb-cli influxdb-client
service influxdb start
systemctl enable influxdb
influx

you can also surf to http://db-01.edgarbv.int:8083/ to check if it works

Back in the cli (influx) enter <jpre> Visit https://enterprise.influxdata.com to register for updates, InfluxDB server management, and monitoring. Connected to http://localhost:8086 version 1.0.2 InfluxDB shell version: 1.0.2 > create database "honeywell" > create user "grafana" with password 'password'

Filling influxdb using evologger

Evohome client readme Evohome client github Freeranger evologger

apt install git
apt-get install python-pip
cd /opt/
git clone https://github.com/freeranger/evologger.git
get clone https://github.com/watchforstock/evohome-client.git
pip install ./evohome-client
pip install influxdb

now cd /evologger

vi config.ini and fill in the usernames and influxdb stuff (port 8806)

To check if the data is being entered, use the influx cli

use honeywell
> show measurements

name: measurements
------------------
name
zone_temp.actual
zone_temp.delta
zone_temp.target

select * from "zone_temp.actual"

should give you some results.

Filling influxdb using domoticz

Under Setup -> More Options -> InfluxDB

Under Edit Link select the Device Name and click Add. It will appear in the table above.

Under general settings remember port 8086 :) Turn on Debug to test if data is being sent. You can find the log in Setup -> log.

Save.

Grafana

The Grafana download page debian installation page for grafana

apt-get install libfontconfig1 apt-transport-https

vi /etc/apt/sources.list

deb https://packages.grafana.com/oss/deb stable main

now you can install

dselect update
apt-get install grafana
systemctl daemon-reload
systemctl enable grafana-server
mv /var/lib/grafana/ /home/
ln -s /home/grafana /var/lib/grafana
systemctl start grafana-server

Verify it works by visiting

http://monitor.edgarbv.int:3000

admin / admin

change password

vi /etc/grafana/grafana.ini

;allow_sign_up = false

Now you can add a data source, which is an influxdb, with name set to Honeywell, URL set to http://db-01.edgarbv.int:8086/ and Influxdb database name, user and password filled in. You can then save and test.

NOTE the URL for data access is port 8086!

Getting started with Grafana guide