Pwnagotchi: Difference between revisions

From Edgar BV Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:
[https://github.com/waveshare/e-Paper/blob/master/RaspberryPi%26JetsonNano/python/readme_rpi_EN.txt Waveshare e-ink display test utility]
[https://github.com/waveshare/e-Paper/blob/master/RaspberryPi%26JetsonNano/python/readme_rpi_EN.txt Waveshare e-ink display test utility]


=Networking=
change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)
change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)


add the following to the end of /boot/cmdline.txt
add the following to the end of /boot/cmdline.txt
   g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B
   g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B
you can't use iwconfig to connect the wireless, you have to use wpa_supplicant

Revision as of 12:17, 12 May 2020

Pwnagotchi.ai installation guide

Raspberry Pi GPIO pinout

Adafruit PiRTC DS3231 remove the GPIO connector and then solder

PiRTC pinout

2017 info on using DS3231 Real Time Clock

Waveshare e-ink display test utility

Networking

change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)

add the following to the end of /boot/cmdline.txt

  g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B

you can't use iwconfig to connect the wireless, you have to use wpa_supplicant