Pwnagotchi

From Edgar BV Wiki
Revision as of 12:20, 12 May 2020 by Unknown user (talk)
Jump to navigation Jump to search

Pwnagotchi.ai installation guide

Raspberry Pi GPIO pinout

Adafruit PiRTC DS3231 remove the GPIO connector and then solder

PiRTC pinout

2017 info on using DS3231 Real Time Clock

Waveshare e-ink display test utility

Networking

Via USB

change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)

add the following to the end of /boot/cmdline.txt

  g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B

In nm-connection-editor you can set the ipv4 settings on your linux box to 10.0.0.1/8 and you can ssh in.

Wifi

you can't use iwconfig to connect the wireless, you have to use wpa_supplicant


ssh in

ssh pi@10.0.0.2