Pwnagotchi
Jump to navigation
Jump to search
Pwnagotchi.ai installation guide
Adafruit PiRTC DS3231 remove the GPIO connector and then solder
2017 info on using DS3231 Real Time Clock
Use
hwclock
For output
Waveshare e-ink display test utility
Networking
Via USB
change ethernet gadget (usb network) to a stable MAC address (choose whatever mac you like)
add the following to the end of /boot/cmdline.txt
g_ether.host_addr=86:5A:EE:60:99:4B g_ether.dev_addr=86:5A:EE:60:99:4B
In nm-connection-editor you can set the ipv4 settings on your linux box to 10.0.0.1/8 and then enable connection sharing and you can ssh in.
ssh pi@10.0.0.2
You may or may not need these firewall rules
#!/bin/bash sudo ip route add 10.0.0.0/8 dev enp0s20f0u1
~$ ip route list default via 192.168.0.1 dev wlp4s0 proto dhcp metric 600 10.0.0.0/8 dev enp0s20f0u1 proto kernel scope link src 10.0.0.1 metric 100 169.254.0.0/16 dev wlp4s0 scope link metric 1000 192.168.0.0/24 dev wlp4s0 proto kernel scope link src 192.168.0.55 metric 600
You will also have to add a DNS server to /etc/resolv.conf
Wifi
you can't use iwconfig to connect the wireless, you have to use wpa_supplicant
ssh in
ssh pi@10.0.0.2