Resetting the RaQ 4 Administrator Password

From Edgar BV Wiki
Revision as of 13:07, 29 October 2007 by Red (talk | contribs) (New page: If you forget the RaQ 4 Administrator password, you can clear it by following these steps. 1. Push and hold the end of a paper clip in the recessed Reset Password button (located between ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

If you forget the RaQ 4 Administrator password, you can clear it by following these steps.

1. Push and hold the end of a paper clip in the recessed Reset Password button (located between the LCD screen and the LCD arrow buttons, on the front of the RaQ 4). Hold the button in for approximately 2 seconds.

The LCD screen displays


Resetting admin

password...


2. Release the button.

3. In your Web browser, enter the URL http://<IP address>/admin/ or http://<host name>/admin/ to access the Server Management screen.

4. If a prompt appears asking for a username or password, enter admin as the username. DO NOT enter a password. Click OK.