Turn your phone into a car computer: Difference between revisions

From Edgar BV Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:


[https://www.youtube.com/watch?v=AM4X8OWlFZ8 Turn Your Old Android Phone/Tablet into the Ultimate Car GPS (for poweron with charger plugged in, see 12:36)]
[https://www.youtube.com/watch?v=AM4X8OWlFZ8 Turn Your Old Android Phone/Tablet into the Ultimate Car GPS (for poweron with charger plugged in, see 12:36)]
* root your phone
* Ensure the phone starts up when the power cable is inserted [[Automated power on with charging cable plugged]]
* install automateit pro
In Automateit pro
* remove all rules and then add these new ones (NB program this with the power cable in, other wise one of the rules will have the system shutting down)
# '''Trigger''': Battery level trigger below 15% '''Action''': (composite action) 1. show notification (low battery) 2. screen brightness lower 3. screen timeout 15 seconds [this will force a shutdown in a later rule]
# '''Trigger''': Battery level below 20% '''Action''': Shutdown device '''Delayed Execution''': 15 minutes '''Rule name''': Battery low shutdown
# '''Trigger''': External Power Disconnected '''Action''': shutdown device '''Delayed execution''': 30 seconds '''Cancel Delayed Execution''': Power connected '''Rule Name''': Power disconnected shutdown
# '''Trigger''': Screen off '''Action''': Shutdown device '''Delayed execution''': 1 minute '''Cancel delayed execution''': (composite OR) 1. Screen on 2. Power Connected '''Rule Name''': Screen off shutdown ''[NB This is because the above rule may sometimes fail to run: if you turn off the car whilst the phone is still booting]''
# '''Trigger''': (composite AND) 1. Boot 2. External power connected '''Action''': Start Application (navigation / Torque) '''Rule name''': torque start
Next
* Remove the lock screen (set to none)
* set screen timeout to 5 minutes (under display - due to a few of the rules)


Because Samsung can't do Fastboot the above method won't work for charger. See [[Automated power on with charging cable plugged]] for information for Samsung phones.
Because Samsung can't do Fastboot the above method won't work for charger. See [[Automated power on with charging cable plugged]] for information for Samsung phones.

Latest revision as of 09:04, 10 December 2019

Turn Your Old Android Phone/Tablet into the Ultimate Car GPS (for poweron with charger plugged in, see 12:36)

In Automateit pro

  • remove all rules and then add these new ones (NB program this with the power cable in, other wise one of the rules will have the system shutting down)
  1. Trigger: Battery level trigger below 15% Action: (composite action) 1. show notification (low battery) 2. screen brightness lower 3. screen timeout 15 seconds [this will force a shutdown in a later rule]
  2. Trigger: Battery level below 20% Action: Shutdown device Delayed Execution: 15 minutes Rule name: Battery low shutdown
  3. Trigger: External Power Disconnected Action: shutdown device Delayed execution: 30 seconds Cancel Delayed Execution: Power connected Rule Name: Power disconnected shutdown
  4. Trigger: Screen off Action: Shutdown device Delayed execution: 1 minute Cancel delayed execution: (composite OR) 1. Screen on 2. Power Connected Rule Name: Screen off shutdown [NB This is because the above rule may sometimes fail to run: if you turn off the car whilst the phone is still booting]
  5. Trigger: (composite AND) 1. Boot 2. External power connected Action: Start Application (navigation / Torque) Rule name: torque start

Next

  • Remove the lock screen (set to none)
  • set screen timeout to 5 minutes (under display - due to a few of the rules)


Because Samsung can't do Fastboot the above method won't work for charger. See Automated power on with charging cable plugged for information for Samsung phones.